#!/bin/sh
# $Id: x264.SlackBuild,v 1.7 2011/05/11 18:46:55 root Exp root $
# Copyright 2009, 2010, 2011, 2013  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:         Eric Hameleers <alien@slackware.com>
# For:        x264
# Descr:      a free h264/avc encoder
# URL:        http://www.videolan.org/developers/x264.html
# Needs:      yasm (compile-time only)
# Changelog:  
# 20090518-1: 19/May/2009 by Eric Hameleers <alien@slackware.com>
#             * Initial build.
# 20100127-1: 28/Jan/2010 by Eric Hameleers <alien@slackware.com>
#             * Updated.
# 20100425-1: 26/apr/2010 by Eric Hameleers <alien@slackware.com>
#             * Updated. The encoder is now capable of producing Blu-Ray
#               compliant video!
# 20100530-1: 31/may/2010 by Eric Hameleers <alien@slackware.com>
#             * Updated for Slackware 13.1.
# 20110510-1: 11/may/2011 by Eric Hameleers <alien@slackware.com>
#             * Updated for Slackware 13.37.
# 20130524-1: 25/may/2013 by Eric Hameleers <alien@slackware.com>
#             * Updated for Slackware 14.
# 
# Run 'sh x264.SlackBuild' to build a Slackware package.
# The package (.txz) and .txt file as well as build logs are created in /tmp .
# Install it using 'installpkg'. 
#
# -----------------------------------------------------------------------------

PRGNAM=x264
VERSION=${VERSION:-20130524}
BUILD=${BUILD:-1}
NUMJOBS=${NUMJOBS:" -j4 "}
TAG=${TAG:-alien}

DOCS="AUTHORS COPYING doc/*.txt"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/${PRGNAM}-snapshot-${VERSION}-2245-stable.tar.bz2"
SRCURL="ftp://ftp.videolan.org/pub/videolan/${PRGNAM}/snapshots/${PRGNAM}-snapshot-${VERSION}-2245-stable.tar.bz2"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Automatically determine the architecture we're building on:
MARCH=$( uname -m )
if [ -z "$ARCH" ]; then
  case "$MARCH" in
    i?86)    export ARCH=i486 ;;
    armv7hl) export ARCH=$MARCH ;;
    armv6hl) export ARCH=$MARCH ;;
    armv5hl) export ARCH=$MARCH ;;
    arm*)    export ARCH=arm ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
    *)       export ARCH=$MARCH ;;
  esac
fi

case "$ARCH" in
  i?86)      SLKCFLAGS="-O2 -march=i486 -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ARCHOPTS=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ARCHOPTS="--enable-pic"
             ;;
  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ARCHOPTS="--enable-pic"
             ;;
  armv6hl)   SLKCFLAGS="-O2 -march=armv6 -mfpu=vfp -mfloat-abi=hard"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ARCHOPTS="--enable-pic"
             ;;
  armv5hl)   SLKCFLAGS="-O2 -mthumb -march=armv5te -mtune=arm1176jzf-s -mfpu=vfp -mfloat-abi=softfp"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ARCHOPTS="--enable-pic"
             ;;
  *)         SLKCFLAGS=${SLKCFLAGS:-"O2"}
             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
             ARCHOPTS=""
             ;;
esac

case "$ARCH" in
    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
    *)       TARGET=$ARCH-slackware-linux ;;
esac

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Save old umask and set to 0022:
_UMASK_=$(umask)
umask 0022

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PRGNAM.log
                          # remove old log files

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  echo "Source '$(basename ${SOURCE})' not available yet..."
  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
  if ! [ "x${SRCURL}" == "x" ]; then
    echo "Will download file to $(dirname $SOURCE)"
    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xvf ${SOURCE}
cd ${PRGNAM}-snapshot-${VERSION}*
chown -R root:root .
chmod -R u+w,go+r-w,a+X-s .

echo Building ...

# Check for yasm, abort if not found:
if ! which yasm >/dev/null 2>&1 ; then
  echo "##"
  echo "## The 'yasm' program does not seem to be installed."
  echo "## The X264 codec compilation needs yasm (nasm will not do)"
  echo "## Aborting the build"
  echo "##"
  exit 1
fi

LDFLAGS="$SLKLDFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --enable-visualize \
  --enable-shared \
  $ARCHOPTS \
  --host=$TARGET \
  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}.log

# Install all the needed stuff to the package dir
make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PRGNAM}.log

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Compress the man page(s):
if [ -d $PKG/usr/man ]; then
  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
fi

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" \
  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txz.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt

# Restore the original umask:
umask ${_UMASK_}

