BIND 9 BIND version 9 is a major rewrite of nearly all aspects of the underlying BIND architecture. Some of the important features of BIND 9 are: - DNS Security DNSSEC (signed zones) TSIG (signed DNS requests) - IP version 6 Answers DNS queries on IPv6 sockets IPv6 resource records (AAAA) Experimental IPv6 Resolver Library - DNS Protocol Enhancements IXFR, DDNS, Notify, EDNS0 Improved standards conformance - Views One server process can provide multiple "views" of the DNS namespace, e.g. an "inside" view to certain clients, and an "outside" view to others. - Multiprocessor Support - Improved Portability Architecture BIND version 9 development has been underwritten by the following organizations: Sun Microsystems, Inc. Hewlett Packard Compaq Computer Corporation IBM Process Software Corporation Silicon Graphics, Inc. Network Associates, Inc. U.S. Defense Information Systems Agency USENIX Association Stichting NLnet - NLnet Foundation Nominum, Inc. For a summary of functional enhancements in previous releases, see the HISTORY file. For a detailed list of user-visible changes from previous releases, see the CHANGES file. For up-to-date release notes and errata, see http://www.isc.org/software/bind9/releasenotes BIND 9.11.0-P2 This version contains fixes for CVE-2016-9131, CVE-2016-9147, CVE-2016-9444 and CVE-2016-9778. BIND 9.11.0-P1 This version contains a fix for CVE-2016-8864. BIND 9.11.0 BIND 9.11.0 includes a number of changes from BIND 9.10 and earlier releases. New features include: - Added support for Catalog Zones, a new method for provisioning servers: a list of zones to be served is stored in a DNS zone, along with their configuration parameters. Changes to the catalog zone are propagated to slaves via normal AXFR/IXFR, whereupon the zones that are listed in it are automatically added, deleted or reconfigured. - Added support for "dnstap", a fast and flexible method of capturing and logging DNS traffic. - Added support for "dyndb", a new API for loading zone data from an external database, developed by Red Hat for the FreeIPA project. - "fetchlimit" quotas are now compiled in by default. These are for the use of recursive resolvers that are are under high query load for domains whose authoritative servers are nonresponsive or are experiencing a denial of service attack: + "fetches-per-server" limits the number of simultaneous queries that can be sent to any single authoritative server. The configured value is a starting point; it is automatically adjusted downward if the server is partially or completely non-responsive. The algorithm used to adjust the quota can be configured via the "fetch-quota-params" option. + "fetches-per-zone" limits the number of simultaneous queries that can be sent for names within a single domain. (Note: Unlike "fetches-per-server", this value is not self-tuning.) + New stats counters have been added to count queries spilled due to these quotas. - Added a new "dnssec-keymgr" key mainenance utility, which can generate or update keys as needed to ensure that a zone's keys match a defined DNSSEC policy. - The experimental "SIT" feature in BIND 9.10 has been renamed "COOKIE" and is no longer optional. EDNS COOKIE is a mechanism enabling clients to detect off-path spoofed responses, and servers to detect spoofed-source queries. Clients that identify themselves using COOKIE options are not subject to response rate limiting (RRL) and can receive larger UDP responses. - SERVFAIL responses can now be cached for a limited time (defaulting to 1 second, with an upper limit of 30). This can reduce the frequency of retries when a query is persistently failing. - Added an "nsip-wait-recurse" switch to RPZ. This causes NSIP rules to be skipped if a name server IP address isn't in the cache yet; the address will be looked up and the rule will be applied on future queries. - Added a Python RNDC module. This allows multiple commands to sent over a persistent RNDC channel, which saves time. - The "controls" block in named.conf can now grant read-only "rndc" access to specified clients or keys. Read-only clients could, for example, check "rndc status" but could not reconfigure or shut down the server. - "rndc" commands can now return arbitrarily large amounts of text to the caller. - The zone serial number of a dynamically updatable zone can now be set via "rndc signing -serial ". This allows inline-signing zones to be set to a specific serial number. - The new "rndc nta" command can be used to set a Negative Trust Anchor (NTA), disabling DNSSEC validation for a specific domain; this can be used when responses from a domain are known to be failing validation due to administrative error rather than because of a spoofing attack. Negative trust anchors are strictly temporary; by default they expire after one hour, but can be configured to last up to one week. - "rndc delzone" can now be used on zones that were not originally created by "rndc addzone". - "rndc modzone" reconfigures a single zone, without requiring the entire server to be reconfigured. - "rndc showzone" displays the current configuration of a zone. - "rndc managed-keys" can be used to check the status of RFC 5001 managed trust anchors, or to force trust anchors to be refreshed. - "max-cache-size" can now be set to a percentage of available memory. The default is 90%. - Update forwarding performance has been improved by allowing a single TCP connection to be shared by multiple updates. - The EDNS Client Subnet (ECS) option is now supported for authoritative servers; if a query contains an ECS option then ACLs containing "geoip" or "ecs" elements can match against the the address encoded in the option. This can be used to select a view for a query, so that different answers can be provided depending on the client network. - The EDNS EXPIRE option has been implemented on the client side, allowing a slave server to set the expiration timer correctly when transferring zone data from another slave server. - The key generation and manipulation tools (dnssec-keygen, dnssec-settime, dnssec-importkey, dnssec-keyfromlabel) now take "-Psync" and "-Dsync" options to set the publication and deletion times of CDS and CDNSKEY parent-synchronization records. Both named and dnssec-signzone can now publish and remove these records at the scheduled times. - A new "minimal-any" option reduces the size of UDP responses for query type ANY by returning a single arbitrarily selected RRset instead of all RRsets. - A new "masterfile-style" zone option controls the formatting of text zone files: When set to "full", a zone file is dumped in single-line-per-record format. - "serial-update-method" can now be set to "date". On update, the serial number will be set to the current date in YYYYMMDDNN format. - "dnssec-signzone -N date" sets the serial number to YYYYMMDDNN. - "named -L " causes named to send log messages to the specified file by default instead of to the system log. - "dig +ttlunits" prints TTL values with time-unit suffixes: w, d, h, m, s for weeks, days, hours, minutes, and seconds. - "dig +unknownformat" prints dig output in RFC 3597 "unknown record" presentation format. - "dig +ednsopt" allows dig to set arbitrary EDNS options on requests. - "dig +ednsflags" allows dig to set yet-to-be-defined EDNS flags on requests. - "mdig" is an alternate version of dig which sends multiple pipelined TCP queries to a server. Instead of waiting for a response after sending a query, it sends all queries immediately and displays responses in the order received. - "serial-query-rate" no longer controls NOTIFY messages. These are separately controlled by "notify-rate" and "startup-notify-rate". - "nsupdate" now performs "check-names" processing by default on records to be added. This can be disabled with "check-names no". - The statistics channel now supports DEFLATE compression, reducing the size of the data sent over the network when querying statistics. - New counters have been added to the statistics channel to track the sizes of incoming queries and outgoing responses in histogram buckets, as specified in RSSAC002. - A new NXDOMAIN redirect method (option "nxdomain-redirect") has been added, allowing redirection to a specified DNS namespace instead of a single redirect zone. - When starting up, named now ensures that no other named process is already running. - Files created by named to store information, including "mkeys" and "nzf" files, are now named after their corresponding views unless the view name contains characters incompatible with use as a filename. Old style filenames (based on the hash of the view name) will still work. This release addresses the security flaws described in CVE-2014-3214, CVE-2014-3859, CVE-2014-8500, CVE-2014-8680, CVE-2015-1349, CVE-2015-5477, CVE-2015-5722, CVE-2015-5986, CVE-2015-8000, CVE-2015-8704, CVE-2015-8705, CVE-2016-1285, CVE-2016-1286, CVE-2016-2088, CVE-2016-2775 and CVE-2016-2776. Building BIND 9 currently requires a UNIX system with an ANSI C compiler, basic POSIX support, and a 64 bit integer type. We've had successful builds and tests on the following systems: COMPAQ Tru64 UNIX 5.1B Fedora Core 6 FreeBSD 4.10, 5.2.1, 6.2 HP-UX 11.11 Mac OS X 10.5 NetBSD 3.x, 4.0-beta, 5.0-beta OpenBSD 3.3 and up Solaris 8, 9, 9 (x86), 10 Ubuntu 7.04, 7.10 Windows XP/2003/2008 NOTE: As of BIND 9.5.1, 9.4.3, and 9.3.6, older versions of Windows, including Windows NT and Windows 2000, are no longer supported. We have recent reports from the user community that a supported version of BIND will build and run on the following systems: AIX 4.3, 5L CentOS 4, 4.5, 5 Darwin 9.0.0d1/ARM Debian 4, 5, 6 Fedora Core 5, 7, 8 FreeBSD 6, 7, 8 HP-UX 11.23 PA MacOS X 10.5, 10.6, 10.7 Red Hat Enterprise Linux 4, 5, 6 SCO OpenServer 5.0.6 Slackware 9, 10 SuSE 9, 10 To build, just ./configure make Do not use a parallel "make". Several environment variables that can be set before running configure will affect compilation: CC The C compiler to use. configure tries to figure out the right one for supported systems. CFLAGS C compiler flags. Defaults to include -g and/or -O2 as supported by the compiler. Please include '-g' if you need to set CFLAGS. STD_CINCLUDES System header file directories. Can be used to specify where add-on thread or IPv6 support is, for example. Defaults to empty string. STD_CDEFINES Any additional preprocessor symbols you want defined. Defaults to empty string. Possible settings: Change the default syslog facility of named/lwresd. -DISC_FACILITY=LOG_LOCAL0 Enable DNSSEC signature chasing support in dig. -DDIG_SIGCHASE=1 (sets -DDIG_SIGCHASE_TD=1 and -DDIG_SIGCHASE_BU=1) Disable dropping queries from particular well known ports. -DNS_CLIENT_DROPPORT=0 Sibling glue checking in named-checkzone is enabled by default. To disable the default check set. -DCHECK_SIBLING=0 named-checkzone checks out-of-zone addresses by default. To disable this default set. -DCHECK_LOCAL=0 To create the default pid files in ${localstatedir}/run rather than ${localstatedir}/run/{named,lwresd}/ set. -DNS_RUN_PID_DIR=0 Enable workaround for Solaris kernel bug about /dev/poll -DISC_SOCKET_USE_POLLWATCH=1 The watch timeout is also configurable, e.g., -DISC_SOCKET_POLLWATCH_TIMEOUT=20 LDFLAGS Linker flags. Defaults to empty string. The following need to be set when cross compiling. BUILD_CC The native C compiler. BUILD_CFLAGS (optional) BUILD_CPPFLAGS (optional) Possible Settings: -DNEED_OPTARG=1 (optarg is not declared in ) BUILD_LDFLAGS (optional) BUILD_LIBS (optional) On most platforms, BIND 9 is built with multithreading support, allowing it to take advantage of multiple CPUs. You can configure this by specifying "--enable-threads" or "--disable-threads" on the configure command line. The default is to enable threads, except on some older operating systems on which threads are known to have had problems in the past. (Note: Prior to BIND 9.10, the default was to disable threads on Linux systems; this has been reversed. On Linux systems, the threaded build is known to change BIND's behavior with respect to file permissions; it may be necessary to specify a user with the -u option when running named.) To build shared libraries, specify "--with-libtool" on the configure command line. Certain compiled-in constants and default settings can be increased to values better suited to large servers with abundant memory resources (e.g, 64-bit servers with 12G or more of memory) by specifying "--with-tuning=large" on the configure command line. This can improve performance on big servers, but will consume more memory and may degrade performance on smaller systems. For the server to support DNSSEC, you need to build it with crypto support. You must have OpenSSL 0.9.5a or newer installed and specify "--with-openssl" on the configure command line. If OpenSSL is installed under a nonstandard prefix, you can tell configure where to look for it using "--with-openssl=/prefix". To support the HTTP statistics channel, the server must be linked with at least one of the following: libxml2 (http://xmlsoft.org) or json-c (https://github.com/json-c). If these are installed at a nonstandard prefix, use "--with-libxml2=/prefix" or "--with-libjson=/prefix". To support compression on the HTTP statistics channel, the server must be linked against libzlib (--with-zlib=/prefix). Python requires 'argparse' and 'ply' to be available. 'argparse' is a standard module as of Python 2.7 and Python 3.2. On some platforms it is necessary to explicitly request large file support to handle files bigger than 2GB. This can be done by "--enable-largefile" on the configure command line. Support for the "fixed" rrset-order option can be enabled or disabled by specifying "--enable-fixed-rrset" or "--disable-fixed-rrset" on the configure command line. The default is "disabled", to reduce memory footprint. If your operating system has integrated support for IPv6, it will be used automatically. If you have installed KAME IPv6 separately, use "--with-kame[=PATH]" to specify its location. "make install" will install "named" and the various BIND 9 libraries. By default, installation is into /usr/local, but this can be changed with the "--prefix" option when running "configure". You may specify the option "--sysconfdir" to set the directory where configuration files like "named.conf" go by default, and "--localstatedir" to set the default parent directory of "run/named.pid". For backwards compatibility with BIND 8, --sysconfdir defaults to "/etc" and --localstatedir defaults to "/var" if no --prefix option is given. If there is a --prefix option, sysconfdir defaults to "$prefix/etc" and localstatedir defaults to "$prefix/var". To see additional configure options, run "configure --help". Note that the help message does not reflect the BIND 8 compatibility defaults for sysconfdir and localstatedir. If you're planning on making changes to the BIND 9 source, you should also "make depend". If you're using Emacs, you might find "make tags" helpful. If you need to re-run configure please run "make distclean" first. This will ensure that all the option changes take. Building with gcc is not supported, unless gcc is the vendor's usual compiler (e.g. the various BSD systems, Linux). Known compiler issues: * gcc-3.2.1 and gcc-3.1.1 is known to cause problems with solaris-x86. * gcc prior to gcc-3.2.3 ultrasparc generates incorrect code at -02. * gcc-3.3.5 powerpc generates incorrect code at -02. * Irix, MipsPRO 7.4.1m is known to cause problems. A limited test suite can be run with "make test". Many of the tests require you to configure a set of virtual IP addresses on your system, and some require Perl; see bin/tests/system/README for details. SunOS 4 requires "printf" to be installed to make the shared libraries. sh-utils-1.16 provides a "printf" which compiles on SunOS 4. Known limitations Linux requires kernel build 2.6.39 or later to get the performance benefits from using multiple sockets. Documentation The BIND 9 Administrator Reference Manual is included with the source distribution in DocBook XML and HTML format, in the doc/arm directory. Some of the programs in the BIND 9 distribution have man pages in their directories. In particular, the command line options of "named" are documented in /bin/named/named.8. There is now also a set of man pages for the lwres library. If you are upgrading from BIND 8, please read the migration notes in doc/misc/migration. If you are upgrading from BIND 4, read doc/misc/migration-4to9. Frequently asked questions and their answers can be found in FAQ. Additional information on various subjects can be found in the other README files. Change Log A detailed list of all changes to BIND 9 is included in the file CHANGES, with the most recent changes listed first. Change notes include tags indicating the category of the change that was made; these categories are: [func] New feature [bug] General bug fix [security] Fix for a significant security flaw [experimental] Used for new features when the syntax or other aspects of the design are still in flux and may change [port] Portability enhancement [maint] Updates to built-in data such as root server addresses and keys [tuning] Changes to built-in configuration defaults and constants to improve performance [performance] Other changes to improve server performance [protocol] Updates to the DNS protocol such as new RR types [test] Changes to the automatic tests, not affecting server functionality [cleanup] Minor corrections and refactoring [doc] Documentation [contrib] Changes to the contributed tools and libraries in the 'contrib' subdirectory [placeholder] Used in the master development branch to reserve change numbers for use in other branches, e.g. when fixing a bug that only exists in older releases In general, [func] and [experimental] tags will only appear in new-feature releases (i.e., those with version numbers ending in zero). Some new functionality may be backported to older releases on a case-by-case basis. All other change types may be applied to all currently-supported releases. Bug Reports and Mailing Lists Bug reports should be sent to: bind9-bugs@isc.org Feature requests can be sent to: bind-suggest@isc.org To join or view the archives of the BIND Users mailing list, visit: https://lists.isc.org/mailman/listinfo/bind-users If you're planning on making changes to the BIND 9 source code, you may also want to join the BIND Workers mailing list: https://lists.isc.org/mailman/listinfo/bind-workers Information on read-only Git access, coding style and developer guidelines can be found at: http://www.isc.org/git/ Acknowledgments - This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/). - This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). - This product includes software written by Tim Hudson (tjh@cryptsoft.com).